/*Google Analytics*/ /*Google ADS */
Retention of flammable liquids and simultaneous retention of extinguishing water. The Anhamm folding bulkhead protects you even when you are not on site. Without electronics, without external energy, this function is still ensured.
Secure your production facilities, storage rooms and hazardousmaterials stores with the Anhamm spill barrier as an Retention of flammable liquids and extinguishing water.
The Anhamm spill barrier works fully automatically, without external energy and without sensors. In addition to extinguishing water retention, leaks and escaping liquids are collected and effectively limited.
FM 4985 approved
Without electrical components
Delivering in one preset unit
complete functional construction component
After installation promptly operational availability
Activation of the spill barrier without external energy
Manually operation possible
More than thousand installations
simple maintenance by your own
Only high quality material
Escaping liquid is captured across the entire opening by the barrier gates basin …
The barrier gate is automatically raised by the escaping liquid …
Specially-designed springs lift the barrier gate into its tightly sealed position.
The Anhamm barrier is delivered in one single unit and is positioned in the ground pit. After the barrier is adjusted to the correct position, the piers of the unit are bolted to the wall on either side. Next, mortar is poured into the recess beneath and surround the unit. The Anhamm design does not not need any external power supply or any other external connection. No switchgear cabinets or similar installations are needed.
The key to Anhamm Spillbarriers are their simplicity! Customers world-wide love the easy-to-use, easy-to-test reliability. All mechanical parts are maintenance-free and only require simple cleaning around the barrier gate. And the barrier, regardless of size, can easily be tested manually.
We do all the service that is needed to make the anhamm spillbarrier.
1.Escaping liquid is captured
2.The barrier gate is automatically raised
3.Spring lift the barrier gate into its position
Retaining hazardous material
The barrier seals off chemically contaminated liquids that present a water hazard from productions sites, storage rooms and hazmat storage facilities.
Retaining burning liquids
The Barrier seals off storage areas containing flammable liquids. A spreading of the burning liquid is therefore effectively counteracted.Read More
The barrier seals off chemically
The complete activation of the barrier was tested with a highly flammable liquid on fire. With the use of the all new heat absorbent technique, the barrier remained absolutely liquid tight. Even after being over 30 minutes under fire, not a single drop passed the barrier system. And still, the barrier was not been pushed to its limits. Following this impressive fire test, a new approval will shortly be issued first and only to the anhamm flammable liquid stop barrier.
Load and Stabilityicon
- more than 20 years of experience
- heavy vehicles can easy drive over
The spillbarrier unit produced in using stainless steel as a standard, but may be adapted to the stored chemicals. The PTFE encased seals guarantee chemical stability.
Third party testedicon
FM approved since 2008– 400 installation worldwide
– automatic closing without external energy
– without any electronic component
– simple Self-installation
– simple maintenance by your own
– manually operation possible
With the existing, TUV approved design, as a basis and three new pending patents the barrier has exceeded its limits to fulfill a new standard for liquid barriers.In the worlds largest burning lab, the barrier was tested with an app. 50MW fire going to the laboratories limits. The complete activation of the barrier was tested with a highly flammable liquid on fire. With the use of the all new heat absorbent technique, the barrier remained absolutely liquid tight. Even after being over 30 minutes under fire, not a single drop passed the barrier system. And still, the barrier was not been pushed to its limits. Following this impressive fire test, a new approval will shortly be issued first and only to the anhamm flammable liquid stop barrier.
"The spill barrier can be driven over and allows unobstructed factory traffic."
0.30 m (12″) to 2.00 m (80″)
0.80 m (32″) to 50.00 m (2000")
Architects | Planners | Investors
- Ground level installation allows easy planning
- No further planning of cables, pipings or connections required
- Flexibility of dimensions
- Drawings in .dxf and PDF format already possible when submitting an offer
- Meets ATEX standard
- Individual approval as hazardous substance retention possible
Tenant | User | Owner
- Low maintenance (mainly cleaning)
- No operating costs
- Free traffic routes
- Low risk of collision due to installation in the ground
- Also suitable for the retention of hazardous substances, products and leaks
- PTFE Seal: Chemical resistant
- Stainless steel 1.4301
Operator | Fire fighters
- Autonomous triggering even in the event of a power failure
- No false alarms
- Escape routes free until liquid reaches door/gate
- Mechanical triggering provides additional benefits for retaining chemicals (product retention) and liquids in the event of leaks
- Fire test tested
- At least 72h Tightness after approx. 35 minutes of firing at at at least 700°C
Two-page information sheet with technical details on function, installation and delivery.Download
Tendering texts for the spill barrierand the floor recess.
Instructions to the installation, functiuon and maintenance of the spill barrier.Download
Would you like to make an enquiry ? Do you have any questions about our products ?
We will be happy to support you with your project and make you an individual offer.
Or support you in any means.